Ölfilter VW Passat 3B2 3B3 Variant 3B5 3B6 Polo Sharan 1,9-2,0 TDI

Ölfilter VW Passat 3B2 3B3 Variant 3B5 3B6 Polo Sharan 1,9-2,0 TDI, Units and Housings CAD models , IRA Hydraulic Pump Technical support and service Linde Hydraulic Pump 7x22x7 Size (mm) Manufacturing Service . Get Your Free. 7x22x7

Bearing number:727 CD/P4A
Size (mm):7x22x7
Bore Diameter (mm):7
Outer Diameter (mm):22
Width (mm):7
d:7 mm
D:22 mm
B:7 mm
PDF

Product Details

Bearing number727 CD/P4A
Size (mm)7x22x7
Bore Diameter (mm)7
Outer Diameter (mm)22
Width (mm)7
d7 mm
D22 mm
B7 mm
C7 mm
d112.6 mm
d212.6 mm
r1 min.0,3 mm
r2 min.0,3 mm
r3 min.0,2 mm
r4 min.0,2 mm
D117.4 mm
D2– mm
da min.9.4 mm
Da max.19.6 mm
db min9,4 mm
ra max.0.3 mm
rb max.0.2 mm
dh13,6 mm
Db max20,2 mm
Weight0,013 Kg
Basic dynamic load rating (C)2,96 kN
Basic static load rating (C0)1,16 kN
(Grease) Lubrication Speed80 000 r/min
(Oil) Lubrication Speed120 000 r/min
Fatigue load limit (Pu)0,049
r1,2 min.0.3 mm
r3,4 min.0.2 mm
a5.5 mm
db min.9.4 mm
Db max.20.2 mm
dn13.6 mm
Basic dynamic load rating C2.96 kN
Basic static load rating C01.16 kN
Fatigue load limit Pu0.049 kN
Attainable speed for grease lubrication80000 r/min
Attainable speed for oil-air lubrication120000 r/min
Ball diameter Dw3.969 mm
Number of balls z9
Reference grease quantity Gref0.162 cm³
Preload class A GA12 N
Static axial stiffness, preload class A11 N/µm
Preload class B GB24 N
Static axial stiffness, preload class B15 N/µm
Preload class C GC48 N
Static axial stiffness, preload class C21 N/µm
Preload class D GD96 N
Static axial stiffness, preload class D30 N/µm
Calculation factor f1.02
Calculation factor f11
Calculation factor f2A1
Calculation factor f2B1.01
Calculation factor f2C1.03
Calculation factor f2D1.05
Calculation factor fHC1
Calculation factor f08.4
Mass bearing0.013 kg
View more

Company Profile

Worktime 9:00-18:00
Phone 86-510-85310167
View more

Related News

  • Current-Insulated Bearings as a Preventive Measure As a rule, it is very difficult to eliminate the causes of bearing voltages that are induced by the motor. Nevertheless, it is possible to avoid damage to the bearing, if the flow of current can either...
  • At present, some large-scale open-pit coal mining equipment generally has the characteristics of large production capacity, high automatic function and high investment in single equipment. Therefore, based on these characteristics, if the equipment is...
  • Recommended Products

    All Products Contact Now