Weg AL80-04 Gear Motor w/ Sumitomo CNFX-0100E-29/G 80/C120 Gear Head / Encoder
With over 10170 full-service stores, our Weg AL80-04 Gear Motor w/ Sumitomo CNFX-0100E-29/G 80/C120 Gear Head / Encoder IRA Hydraulic Pump Technical support and service inventory is extensive 20 Bore Diameter (mm) and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars. 20x42x12
| Bearing number: | HCS7004-C-T-P4S |
| Size (mm): | 20x42x12 |
| Bore Diameter (mm): | 20 |
| Outer Diameter (mm): | 42 |
| Width (mm): | 12 |
| d: | 20 mm |
| D: | 42 mm |
| B: | 12 mm |
| PDF |
|
Product Details
| Bearing number | HCS7004-C-T-P4S |
| Size (mm) | 20x42x12 |
| Bore Diameter (mm) | 20 |
| Outer Diameter (mm) | 42 |
| Width (mm) | 12 |
| d | 20 mm |
| D | 42 mm |
| B | 12 mm |
| C | 12 mm |
| Angle (α) | 15 ° |
| a | 10 mm |
| r min. | 0,6 mm |
| Da | 37 mm |
| ra max. | 0,6 mm |
| da | 25 mm |
| Weight | 0,074 Kg |
| Basic dynamic load rating (C) | 4,3 kN |
| Basic static load rating (C0) | 3,2 kN |
| (Grease) Lubrication Speed | 53 000 r/min |
Company Profile
| Worktime |
9:00-18:00 |
| Phone |
86-510-85310167 |
Sumitomo Cyclo Transmission F1C-A25-59 i=59 F1CA2559
SUMITOMO CYCLO EUROPE CNV-5085G-51 CNV5085G51 Transmission
Cyclo Drive Induction Gearmotor Sumitomo CNHM1-5100-B
REDUCED Altax Cyclo Drive Induction Gearmotor Sumitomo CNVM02-5075-6 origin
Cyclo Drive Induction Gearmotor Sumitomo CNHM01-4085
SUMITOMO CYCLO DRIVE CHHM-4190DB 2537:1 RATIO 075KW 1750RPM